Features
Frame & Construction:
-Solid Machine frame normalized for vibration absorbing distortion free base.
-Table plates ground to exact tolerances and chromed throughout machine including infeed table.
-Infeed table adjustable for jointing.
-Inside fence pinned and bolted for a secure rigid fence.

Feed Mechanism:
-Variable speed chainless cardan feed system with more upper and lower feed rolls for positive stock feed.
-Hardened and crhome rollers.
-Nine powered upper feed rolls and 4 powered and 1 idle lower bed roll.
-Upper rolls air regulated, raised and lowered by he heaviest powered feed beam on the market.

Spindle Assembly:
-Precision ground spindles (SCM-44 steel).
-Four high precision bearings per spindle give excellent cutting accuracy.
-Central lubrication point for all spindles and slides.

Holddowns and Pressure Elements:
-Lateral spring loaded rollers 2 prior to first bottom and 2 after first.
-Bottom opposite the right spindle.
-Two overhead adjustable holddown rollers
-Both top heads equipped with spring pressured receding chipbreakers

Machine Operation:
-Mechanical digital read-out in both axis of each spindle.
-Spindle adjusts from front along with feed start and stop and jog switches to ease in set-up.


Machine Specifications:
-Feed motor: 10HP Variable (18-78 fpm)
-1st spindle bottom: 15HP
-2nd spindle right: 15HP
-3rd spindle left: 15HP
-4th spindle bottom: 30HP
-5th spindle top: 30HP
-6th spindle bottom: 25HP
-Working width: 1/2" to 11 7/8"
-Working height: 3/8" to 5"
-Spindle diameter: 2 1/8"
-Spindle speed: 6000 rpm
-Clamping length horizontal spindle: 11.81"
-Clamping length vertical spindle: 5.12"
-Diameter of feed rolls: 140mm
-Adjustment range of straightening table: 1/2"
-Adjustment range of vertical spindle(axial): 2.36"
-Adjustment range of all horizontal spindle(axial): 1.18"
-Setting accuracy of digital read-outs: .05mm
-Minimum length of stock: 11.5"
-Minimum length with short stock option: 7.87"
-Cutting circle 1st bottom: 5" to 5 13/16"
-Cutting circle vertical spindles: 4" to 7 7/8"
-Cutting circle last bottom: up to 9"
-Machine net weight: 14,700 lbs.
-Manual lubrication pump for bed
-Receding chipbreakers on top heads
-Hydro Lock outboard bearing on each horizontal spindle
-40mm side fence
-4 powered bed rolls
-1 idle roller in bed
-9 upper feed rolls