Blackhawk Machinery Sales
Blackhawk Machinery SalesLiquidationsList Your MachineMachinery WantedHelpful LinksContact Us
Receive New Listing Alerts!
or Email Us
Fax: 319.232.8438
54 Lane Street
Waterloo, Iowa 50703 USA

Reference#: Northfield Heavy Duty, 27
Status: Available
Type: Bandsaw
Make: Northfield
Age: NEW
Heavy one piece cast iron frame is hollow cored for strength and rigidity.
Aluminum alloy disc wheels use endless neoprene tires which are epoxy adhered, crown ground and balanced to enhance blade tracking.
Long, rigid heavy duty quills use sealed for life bearings and stressproof steel shafts. The top quill is adjustable to easily control blade tracking.
Sensitive saw straining device is of knife edge spring lever design which absorbs shock and provides proper tension. An easily read tension indicator is provided.
Heavy steel wheel guards provide maximum blade containment yet allow fast and easy blade changes. The guide post guard adjusts with the upper guide.
Ball bearing guides are used both above and below the tables.

Braking Options:
1. Lower wheel foot brake is standard equipment. A switch can be added to turn off the drive motor upon application of foot brake.
2. Two wheel mechanical brakes are also available.
3. Upper wheel auto electric brakes can be added that automatically shuts down the drive motor and applies a fail safe brake to the upper wheel in the event of blade breakage or the blade running off the wheels. This braking action also activates from the stop staion or application of foot brake.
4. Two wheel auto electric brakes provide the finest failsafe braking system used on any bandsaw. This is available on any bandsaw with a factory installed motor. Both wheels auto matically brake when 1) stope button is pressed, 2)foot pedal is activated, 3) blade breaks, or 4) blade runs off wheel.

Wheel face: 1-1/2"
Table size: 25" x 25"
Front edge of table to teeth of 3/8" blade: 9-1/2"
Capacity under guide: 15"
Table tilts to right: 45 degrees
Table tilts to left: 5 degrees
Horizontal cap: 26-1/2"
Table height: 40"
Wheels: Aluminum disc with neoprene tires
Brakes: Lower wheel, foot operated
Guides: Carter CP Size #0
Voltage: 208-230/460, 575, 60 HZ, 3 Phase
Floor space: 35" x 45"
Height of standard saw: 84"
Domestic Shipping weight: 1,400 lbs.
Export Shipping Weight: 1,800 lbs.
Cubic export crate size: 108 cu. feet
Wheel circumference: 7.068 feet
Contact: 319.232.8184
319.232.8184  |  Email Us  |  Fax: 319.232.8438  |  54 Lane Street  |  Waterloo, Iowa 50703 USA
Liquidations | List Yours | Wanted | About Us | Links | Contact Us
© Black Hawk Machinery Sales Inc. All rights reserved.   Site powered by Intrcomm Technology's SMC.