Long, rigid, heavy-duty quills use large, sealed-for-life ball bearings and high quality spindle steel. Top quill is adjustable for accurately and easily tracking the blade.

Stream-lined, heavy steel reinforce guards are of pleasing design and noiseless construction. The guide post guard adjusts with the guide to give maximum protection.

Sensitive, positive saw straining device consists of a very sensitive knife edge spring lever arrangements which absorbs shock and provides proper tension. Tension indicator is easily read.

Carter CP series micro precision ball bearing guides are furnished as standard equipment. Size 1 on top, size 0 below the table. Paddock, Wright, and Carter Guideall guides available upon request.

Braking Options:
-Upper wheel auto electric brake(standard) automaticall shuts down the drive motor and applies a fail safe brake to the upper wheel in the event of blade breakage or the blade running off the wheels. This braking action also activates from the stop station.

-Two Wheel Auto Electric Brakes provide the finest fail safe braking system used on any band saw. This is available on any band saw with a factory installed motor. Both wheels automatically brake when 1)stop button is pressed, 2)blade breaks, or 3)blade runs off wheel.

Table Options:
(The saw can be ordered with various table options)

-No Table: for integration with custom table/conveyor systems.

-MIK6 48" x 96" Aluminum Table: in which miter gauge or tracking grooves can be machined or alignment of fixturing.

-Large 50" x 50" Cast Iron Table: This table mounted to the right of the blade allows large or heavy workpieces to be accurately supported and cut. A stationary 48" x 48" sheet steel table is provided to the left between the blade and column.

An optional hydraulic feed with infinitely adjustable feed reates to 50 fpm is available to provide push-button controlled cutting of the most unweildly workpieces. Large fencse and hold down clamps can be provided.

Specifications:
Wheel face: 1-1/2
Table size: 48 x 96 Sheet Steel
Front edge of table to teeth of 3/8" blade: 12"
Capacity under guard: 15"
Horizontal capacity: 50"
Table height: 42"
Wheels: aluminum disk 27"
Brake: upper wheel auto electric
Guides: Carter CP Size 0
Blade: One 3/8" furnished
Voltages: 208-230/460-575
Circumference of 27" wheel: 7.068"
Height: 95"
Floor space: 50" x 125"
Domestic shipping weight: 3500 lbs.
Export shipping weight: 4000 lbs.
Cubic export crate size: 480 cu. ft.
3 phase standard, 110 volt at push button standard