37 spindle shutter boring machine. Standard chucks, 19 right and 18 left. Spindle mounted in gear head with two sealed ball bearings. Hardened steel gear pressed onto spindle. Spindles are 1" on center. 1/2" maximum drill bit capacity. Maximum drill stroke of 3-1/2". 37 spindles are driven by two 2hp motors. Pneumatic movement of boring head via foot pedal. Three penumatic hold downs that automatically activate when machine is cycled. Grease fitting on boring head. Equipped with 47" back fence. One 39" fence extension with scale. One flip stop. One mechanical digital read-out for drill bit position. 4-1/4" spring loaded repeat stops. Maximum material thickness of 2". Tool set included.

Electrical connection: 15amps at 220 volt, 3 phase
Air: 4cfm at 90psi
Spindle distance: 37 spindles 1" apart
Drive motors: (2)2hp
Length of back fence: 47"
Table size: 12" x 47"
Table height: 35-1/2"
Width of machine: 47-1/2"
Depth of machine: 41-1/2"
Weight: 940 lbs.