10'6" (3200mm) sliding table. Sliding table equipped with roller guide system. Large crosscut fence with 2 flip stops. Flip stops are built with closed ring system which eliminates any side to side play. Quick relase crosscut fence. Separat miter fence with flip stop. Manual rip fence with fine adjustments and pneumatic suspension (Casolin Patent). Steel base with reinforced tortional strength of frame. 9hp main motor 1 hp scoring motor. Spindle lock on main blade. 1hp scoring motor. Set of blades included (one 12" main blade with one split scoring blade). Electric and tilt of blade. LED redout tilt angle of blades. External scoring adjustments for height fromfront of machine. Side to side scoring adjustments made thru table. Built in lower dust shroud. Swing away guard with built in dust collection and see thru shroud. Complete set of tooling included. 230volt/3 phrase(+/-5%, depending on voltage).

Electrical connection: 30amps at 230 volts, 3 phase
Dust extraction: one 4-3/4" & one 3" outlet, min of 1900cfm
Fixed table size: 27" x 46"
Sliding table size: 14-1/4" x 126"
Table height: 34-1/2"
Rip capacity: 51"
Max length of extended cross cut fence: 136"
Tilting range: 0-45 degrees
Main blade hp: 9 hp
Main blade sized with scoring blade: 12", 14" with 30mm bored
Main blade size without scoring blade: 16" with 30mm bore
Main blad speed: 4000RPM
Scoring blade hp: 1 hp
Scoring blade size: 120mm x 2.8-3.6m x 20mm
Scoring blade speed: 8000RPM
Weight: 1985 lbs.
Total power required (amps): 30 amps at 230 volt, 3 phase
Machine Length: 10'6"
Machine Width: 11'2"
Max stroke possible: 22'